Behzi

Types of pipe opening springs and how they work

study time 1 minute

Types of pipe opening springs and how they work

Types of well opening springs and types of pipe opening spring heads, which are used to unclog pipes, are one of the most common tools used by pipe openers to remove blockages. The simplest type of well opener spring; The spring is a manual pipe opener that we will examine in the following.

What is the working method of different pipe opening springs?

The working method of all types of pipe opening springs is that by using the conical screws at the tip of the spring, it moves the extra materials that have caused the clogging of the well into the well. For this reason, in addition to unclogging the pipe, it causes all materials such as hair, fat layers, etc. to be separated from the wall of the well and the efficiency of the well increases. Pipe opening springs are available in 2 models, according to the type of clogging, the applications of each of them are different. These 2 models are the following: Manual pipe opening spring Electric spring (pipe opening device)

Usually, a manual pipe opener spring is used to open simple surface clogs, which solves the problem easily and immediately. But the electric spring is performed by a device called a drill, which is used for deep and hard clogs and wells that are long.

How to work with a manual pipe opening spring

First step: before using all types of manual pipe openers, you must wear appropriate gloves.

Second step: Then put the tip of the manual pipe opener inside the sewer pipe and slowly move it into the well. until it reaches an obstacle and the opening spring does not go any further.
It is important to pay attention to the fact that during the movement of the spring in the joints and knees, this must be done carefully so that the pipe is not damaged.
Step 3: When you are sure that the manual spring of the pipe opener has reached the blockage, you should turn the end of it. The head of all types of pipe opening spring has elastic properties and starts to twist inside the pipe, which causes the extra material inside the pipe to wrap around the manual pipe opening spring.

Head drill pipe opening spring

If the blockage is small and cannot be fixed by turning it by hand, you can connect the end of the manual pipe opener spring to a drill to increase the work speed and better efficiency of the pipe opener spring. which creates a kind of spring for the opening of the head-drilled pipe.

But you should note that using a drill pipe opening spring is not suitable for surface clogs due to its strong rotation; Because it increases the possibility of damage to the pipe.
Be the first to comment on this post.